Hi Lori,
My reply above gave the short version. Here is the fuller one, with the ground rule first: I don’t work through questions from other providers’ question banks, the Primer included. Their authors own those questions and their answer keys, so the best place to confirm a specific Primer answer is the Quality Council of Indiana. I’m happy to explain the concept behind it, though, because “spread” trips up a lot of people.
When a question gives you the process spread and nothing else about variation, read the spread as the natural width of the process: 6 standard deviations, or plus and minus 3 sigma. That is the same 6 sigma that sits in the denominator of Cp. So sigma is the spread divided by 6.
From there, Cpk is the distance from the process mean to the nearest specification limit, divided by 3 sigma. Work out both sides (upper and lower) and keep the smaller one. The side closest to its limit is the one that controls Cpk.
The d2 route (sigma = R-bar / d2) is for a different situation: you’re given an average range from subgroups of a known size. If a question gives you no subgroup size, that’s a clue the d2 table isn’t the intended path.
There’s a full walkthrough with worked examples in my Process Capability (Cp and Cpk) article.
Ted
